Opening the power liftgate (if equipped), Car finder, Locks and security – FORD 2008 Expedition v.1 User Manual

Page 159

Advertising
background image

5–button remote

Opening the power liftgate (if equipped)

Press the control twice to fully
unlatch and open the liftgate.

Make sure all persons are clear of the liftgate area before using
power liftgate control.

In order to fully lower and latch the liftgate, press the control twice.
If the liftgate stops mid travel, it may have detected an obstacle, Check
to ensure the liftgate swing zone is free from obstruction and reset the
power assist by manually closing the liftgate. Normal operation can then
be resumed.

Make sure the liftgate is closed to prevent exhaust fumes from
being drawn into the vehicle. This will also prevent passengers

and cargo from falling out. If you must drive with the liftgate open,
keep the vents open so outside air comes into the vehicle.

Car finder
Press

twice within 3 seconds. The horn will chirp and the turn lamps

will flash. It is recommended that this method be used to locate your
vehicle, rather than using the panic alarm.

2008 Expedition (exd)
Owners Guide (post-2002-fmt)
USA
(fus)

Locks and Security

159

Advertising