Clarion DB458RMC - Manual (Page 11)

280-8135-00
DB458RMC
13
English
“Z-EHCER 1” ➜ “Z-EHCER 2” ➜ “Z-EHCER 3”
➜ “Z+ OFF” ➜ “Z-EHCER 1”...
• Z-EHCER 1 : bass emphasized
• Z-EHCER 2 : treble emphasized
• Z-EHCER 3 : bass and treble emphasized
• Z+ OFF
: no sound effect
Audio Mode Adjustments
1. Press the [A-M] button to select the
adjustment mode. The mode switches as
follows each time the [A-M] button is
pressed:
BASS ➜ TREB ➜ BAL ➜ FAD ➜ Previous
mode
∗ The display returns to the previous mode 7
seconds after the adjustment.
∗ When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Note:
• When the Z-Enhancer function is turned on,
BASS (bass) and TREB (treble) cannot be
selected.
• Adjusting the bass (BASS)
2. Turning the [ROTARY] knob clockwise
emphasizes the bass; turning it
counterclockwise attenuates the bass.
∗ The factory default setting is “0”. (Adjustment
range: –7 to +7)
• Adjusting the treble (TREB)
2. Turning the [ROTARY] knob clockwise
emphasizes the treble; turning it
counterclockwise attenuates the treble.
∗ The factory default setting is “0”. (Adjustment
range: –7 to +7)
• Adjusting the balance (BAL)
2. Turning the [ROTARY] knob clockwise
emphasizes the sound from the right
speaker; turning it counterclockwise
emphasizes the sound from the left speaker.
∗ The factory default setting is “0”. (Adjustment
range: L13 to R13)
• Adjusting the fader (FAD)
2. Turning the [ROTARY] knob clockwise
emphasizes the sound from the front
speakers; turning it counterclockwise
emphasizes the sound from the rear
speakers.
∗ The factory default setting is “0”. (Adjustment
range: F12 to R12)
• When the adjustment is complete
3. Press the [A-M] button several times until the
function mode is reached.
Basic Operations
Radio Operations
Listening to the radio
1. Press the [SRC] button and select the radio
mode. The frequency or PS appears in the
display.
∗ PS: Programme service name
2. Press the [BND] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the following
order:
FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜ FM1...
3. Press the [ a ] or [ d ] button to tune in the
desired station.
Tuning
There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to
receivable broadcast stations; LOCAL SEEK
can tune in to only broadcast stations with a
good reception sensitivity.
1. Press the [BND] button and select the
desired band (FM or AM (MW, LW)).
2. Tune into a station.
∗ If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek
tuning is now available.
∗ If “TA” is lit in the display, TP stations are
automatically sought.
● DX SEEK
Press the [ a ] or [ d ] button to automatically
seek a station.
When the [ d ] button is pressed, the station is
sought in the direction of higher frequencies; if
the [
a ] button is pressed, the station is sought
in the direction of lower frequencies.
∗ When seek tuning starts, “DX” appears in the
display.
● LOCAL SEEK
If you press and hold the [ a ] or [ d ] button for
1 second or longer, local seek tuning is carried
out. Broadcast stations with good reception
sensitivity are selected.
∗ When local seeking starts, “LO” appears in the
display.