Clarion DB458RMC - Manual (Page 22)

24
DB458RMC
280-8135-00
English
To change settings
1. Press and hold the [D] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [ a ] or [ d ] button to select the
“item name”.
“SCREEN SVR” ↔ “MSG INP” ↔ “AUTO
SCROL” ↔ “DIMMER” ↔ “TEL-SWITCH”
↔ “SYS CHK<E>” ↔ ...
3. Turn the [ROTARY] knob to select the
“desired setting value”.
∗ In the case of item names appearing with the
“E” suffix, after the item name, the [ ] button
must be pressed to display the setting value.
∗ After completing settings, press the [D] button
to return to the previous mode.
● Turning the screen saver function on
or off
This unit is provided with the screen saver
function which allows you to show various kinds
of patterns and characters in the Operation
Status indication area of the display. You can
turn on and off this function.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
∗ The factory default setting is “ON”.
2-1. Select “SCREEN SVR”.
3-1. Turn the [ROTARY] knob to select the setting.
Each time you turning the [ROTARY] knob,
the setting changes in the following order:
SS OFF ➜ SS ON ➜ SS MESSAGE
● Entering MESSAGE INFORMATION
When the use of the message is selected for the
screen saver setting, you can change the
contents of the message.
∗ Up to 30 characters can be entered.
∗ The factory default setting is “Welcome to Clarion”.
2-1. Select “MSG INP<E>”.
3-1. Press the [ ] button.
3-2. Press the [ a ] or [ d ] button to move the
cursor.
3-3. Press the [BND] button to select a
character. Each time you press the [BND]
button, the character changes in the
following order:
Operations Common to
Each Mode
2. Each time you press the [ER] button, the
display switches in the following order:
TRK ERASE ➜ FLD ERASE ➜ Normal
mode
Note:
• Do not turn off the power to the unit or switch the
operation mode during erasing recordings.
● TRK ERASE
1. Press the [SRC] button to select the MC mode.
2. Play back a track to be erased, and press
the [ER] button to select “TRK ERASE”.
3. While “TRK ERASE” is showing on the
display, press and hold the [ ] button for 2
seconds or longer. The title display shows
“ERASING” as the track currently being
played back is erased.
● FLD ERASE
1. Press the [SRC] button to select the MC mode.
2. Play back any track of the folder to be
erased, and press the [ER] button to select
“FLD ERASE”.
3. While “FLD ERASE” is showing on the
display, press and hold the [ ] button for 2
seconds or longer. The title display shows
“ERASING” as the folder currently being
played back is erased.
● ALL ERASE
1. Press the [SRC] button to select the MC mode.
2. Press the [ER] button for 2 seconds or longer
to select “ALL ERASE”.
3. While “ALL ERASE” is showing on the
display, press and hold the [ ] button for 2
seconds or longer. The title display shows
“ERASING” as ALL ERASE is executed.
Remaining capacity of the memory
By pressing the [REC] button while in the MC
mode, the remaining capacity of the flash
memory can be displayed for 4 seconds as an
approximate recordable time in “MM (minute):
SS (second)”.
The title display shows “AVL 123:45”.
Note:
• The recordable time shown varies according to
the set recording mode
MUSIC CATCHER Operations