Locks and security – FORD 2002 Crown Victoria v.2 User Manual

Page 100

Advertising
background image

To unlock all doors, enter the
factory-set code or personal code
(driver door unlocks) and press 3/4
within five seconds.

To release the trunk, enter the
factory-set code or personal code
(driver door unlocks) and press 5/6
within five seconds.

After the factory-set code or personal code has been entered, you can
unlock all doors (press 3/4) and release the trunk (press 5/6) as long as
the controls are pressed within 5 seconds of each other.

Locking doors with the keyless entry system

It is not necessary to enter the factory-set code prior to locking all doors.
To lock the doors:

Press 7/8 and 9/0 at the same time.

SECURILOCK

ி

PASSIVE ANTI-THEFT SYSTEM

SecuriLock

௢ passive anti-theft system is an engine immobilization

system. This system is designed to prevent the engine from being started
unless a coded key programmed to your vehicle is used.

The SecuriLock

௢ passive anti-theft system is not compatible with

non-Ford aftermarket remote start systems. Use of these systems may
result in vehicle starting problems and a loss of security protection.

1 2

3 4

5 6

7 8

9 0

1 2

3 4

5 6

7 8

9 0

1 2

3 4

5 6

7 8

9 0

Locks and Security

100

Advertising