Locks and security – FORD 2002 Crown Victoria v.2 User Manual

Page 94

Advertising
background image

Locking the doors

Press this control to lock all doors.

The horn will chirp and the
parklamps/taillamps will flash to
confirm the control was pressed.

Deactivating/activating the horn chirp feature

The horn chirp feature can be turned on/off through the following
procedure using the power door locks:

You must complete steps 1-7 within 30 seconds or the procedure will
have to be repeated. If the procedure needs to be repeated, you must
wait 30 seconds.

1. Turn the ignition key to ON.

2. Press the power door unlock control on the door panel three times.

3. Turn the ignition key from ON to OFF.

4. Press the power door unlock control three times.

5. Turn the ignition back to ON. The door locks will cycle lock/unlock.

6. Press the unlock control twice.

7. After a five to ten second delay, the door locks will cycle lock/unlock
to confirm successful programming.

8. Turn the ignition to OFF.

This feature can also be turned
on/off through the following
procedure using the keyless entry
keypad.

1. Enter the keyless entry keypad factory-set code.

2. Within 5 seconds press and hold 7/8 control.

3. Within 5 seconds with 7/8 held down, press and release 1/2 control.

4. Release 7/8 control. The doors will lock/unlock to confirm successful
programming.

1 2

3 4

5 6

7 8

9 0

Locks and Security

94

Advertising