Contemporary Research IP-HDVR - Manual (Page 11)

On-Screen Menus
On-Screen Menus HDV-RC IR Remote
The remaining tuner capabilities can be set up by easy-to-use on-screen menus. The menus can be accessed
from the HD-RC IR remote control using the Menu, Arrow, Select ( ), Surf, and Exit buttons. You can also
use similar buttons on the IP-HDVR front panel.
• Menu – Displays the first level of the on-screen menu, step backward from menu levels
• TV Guide – Displays the TV Guide On Screen Electronic Program Guide (EPG)
• Arrows – Use up/down keys to select main menus, left/right arrow keys to move through sub-
menus
• Select – Can step forward into sub-menus or confirm an action, the button in the center of the
directional arrows is the same function as Select
• Surf – Selects channels for surf list in Edit Channel mode, steps through favorite channels in normal
operation
• Exit – Exits menu
Analog and Digital Tuning
One of the biggest paradigm shifts in digital TV is how channels are accessed. Gone is the familiar Channel
33. Now you have 33-0, 33-1, 33-2, and so on. In a nutshell, the new tuning options are:
• Analog Channels. Entering the number-0 accesses the traditional analog TV channel.
• Digital Channels. Entering the same channel-1 tunes the digital equivalent of the analog channel.
Note that the digital channel is broadcast on a UHF frequency. Digital tuners see the channel ID (NN-
1) in the signal and lists by that name instead of the actual frequency. This way, the broadcasters
keep their channel identity, even when analog goes away.
• Multicast Digital Channels. Because digital is more compressed than analog, broadcasters are
often including additional sub-channels, listed as NN-2, NN-3; up to 6 if the station is only
broadcasting SD quality programming.
• Two-Digit Tuning. If you are currently watching a digital channel, entering the old channel format,
such as 33, will access 33-1. If you are watching an analog channel, entering 33 will take you to
33-0.
Contemporary Research 11 IP-HDVR HD Tuner-DVR