Contemporary Research IP-HDVR - Manual (Page 14)

Menu Setup
Channel Menus
EZ Scan Channels
Before starting scan, set up TV Guide for off-air or cable
operation. To receive both off-air and cable, set TV Guide
for cable operation.
• Press MENU to display the menu window
• Press SELECT or f to select the EZ Scan menu
• Use the ARROW keys to select off-air (Antenna) or
CATV (cable) format
• Press SELECT to enter format and begin auto-scanning
Note that re-scanning channel will erase Favorite Channel and
Surf settings. Go to Channel Edit to restore settings.
Edit Channels
The Edit Channel window is useful, easy tool for managing your
favorite channels. The active channels (black) on the list will be
selected when you send Channel Up and Channel Down
commands. The inactive channels can still be selected from
direct numeric channel access commands (xx-xx)
• Select the Ch Edit menu
• Use the left/right arrows to select a channel group TV
(analog TV), CATV (analog cable), DTV (ATSC TV) ,
CADTV (ATSC cable)
• Highlight an active channel (black text) with arrows
• The IP-HDVR will display the highlighted channel
• Press SELECT to remove (dimmed text) or restore a
channel to the channel list
• Press SURF to add to Surf list
• Press MENU to exit channel editing
DTV Signal
Press to view signal level of the current channel. Same as the
Signal IR and RS-232 command. Identical to Signal command on
remote or RS-232.
The Signal icon is real-time, so you can adjust antenna for best
reception.
Contemporary Research 14 IP-HDVR HD Tuner-DVR