NISSAN 2009 Altima Coupe - Owner's Manual User Manual

Page 204

Advertising
background image

SEEK/TRACK (tuning)

button:

Press the SEEK/TRACK button

or

for less than 1.5 seconds to tune from high to low

or low to high frequencies and stop at the next

broadcasting station.
“Scan” (tuning) key:
Touch the “Scan” key. SCAN illuminates in the

display window. Scan tuning begins from low to

high frequencies. Scan tuning stops for 5 sec-

onds at each broadcasting station that has suffi-

cient signal strength. Touching the “Scan” key

again during this 5 second period stops scan

tuning and the radio remains tuned to that station.
Station memory operations:
18 stations can be set for the FM, AM or SAT

(Satellite if so equipped) radio to the A, B and C

preset button in any combination of FM, AM or

SAT stations.

1. Press the A·B·C button or the “Preset” key to

select preset channel A, B or C.

2. Press the RADIO button to select the de-

sired FM, AM or SAT station band.

3. Tune to the desired station using manual

tuning, seek tuning or scan tuning. Press

and hold any of the desired station memory

(1 – 6) buttons until a beep sound is heard

(the station will now appear in one of the 1 –

6 keys on the screen)

4. The channel indicator will then come on and

the sound will resume. Memorizing is now

complete.

5. Other buttons can be set in the same man-

ner.

If the battery cable is disconnected, or if the fuse

blows, the radio memory will be canceled. In that

case, reset the desired stations.
Radio data system (RDS):

RDS stands for Radio Data System, and is a data

information service transmitted by some radio

stations on the FM band (not AM band). Cur-

rently, most RDS stations are in large cities, but

many stations are now considering broadcasting

RDS data.
RDS can display:

● Station call sign, such as “WHFR 98.3”.
● Station name, such as “The Groove”.
● Music or programming type such as “Clas-

sical”, “Country” or “Rock”.

If the station broadcasts RDS information, the

RDS icon is displayed.

Compact disc (CD) changer operation

With the ignition switch in the ACC or ON posi-

tion, press one of the CD changer (1 – 6) but-

tons. Once the CD slot has open insert the

compact disc into the slot with the label side

facing up. The compact disc will be guided auto-

matically into the slot and start playing.
If the radio is already operating, it will automati-

cally turn off and the compact disc will play.
If the system has been turned off while the com-

pact

disc

was

playing,

pressing

the

ON·OFF/VOL control knob will start the compact

disc.
Loading buttons:
1 Disc Load:

● Press one of the CD changer (1 – 6) select

buttons for less than 1.5 seconds, then in-

sert the CD.

● While in CD mode press one of the station

and CD select (1 – 6) buttons on the radio,

then insert the CD.

● While in CD mode press one of the CD (1 –

6) keys on the screen, then insert the CD.

All Disc Load:

● Press and hold one of the CD changer (1 –

6) buttons for more than 1.5 seconds.

4-40

Monitor, climate, audio, phone and voice recognition systems

REVIEW COPY—

2009 Altima (alt)

Owners Manual (owners)—USA_English (nna)
02/03/09—debbie

Advertising