Windshield wiper and washer switch -26, Switch operation -26 – NISSAN 2010 Altima Coupe - Owner's Manual User Manual

Page 105

Advertising
background image

(1) This device may not cause harmful in-
terference, and (2) this device must accept
any interference received, including inter-
ference that may cause undesired opera-
tion of the device.

CHANGES OR MODIFICATIONS NOT EX-
PRESSLY APPROVED BY THE PARTY RE-
SPONSIBLE FOR COMPLIANCE COULD
VOID THE USER’S AUTHORITY TO OPER-
ATE THE EQUIPMENT.

Security indicator light

The security indicator light blinks whenever the
ignition switch is placed in the OFF, LOCK or ACC
position. This function indicates the NISSAN Ve-
hicle Immobilizer System is operational.

If the NISSAN Vehicle Immobilizer System is mal-
functioning, the light will remain on while the
ignition switch is placed in the ON position.

If the light still remains on and/or the en-
gine will not start, see a NISSAN dealer for
NISSAN Vehicle Immobilizer System ser-
vice as soon as possible. Please bring all
registered keys that you have when visiting
your NISSAN dealer for service.

SWITCH OPERATION

The windshield wiper and washer switch oper-
ates when the ignition switch is placed in the ON
position.

Push the lever down to operate the wiper at the
following speed:

1

Intermittent — intermittent operation can be
adjusted by turning the switch toward

A

(Slower) or

B

(Faster). Also, for vehicles

equipped with speed dependent wipers, the
intermittent operation speed varies in accor-
dance with the vehicle speed. (For example,
when the vehicle speed is high, the intermit-
tent operation speed will be faster.)

LIC0474

LIC1061

WINDSHIELD WIPER AND WASHER
SWITCH

2-26

Instruments and controls

Advertising