In-cabin microfilter -20, Windshield wiper blades -20, Cleaning -20 – NISSAN 2010 Altima Coupe - Owner's Manual User Manual

Page 377

Advertising
background image

3

Wipe the inside of the air cleaner filter hous-
ing and the cover with a damp cloth.

NOTE:

After installing a new air cleaner, make
sure the air cleaner cover is seated in the
housing and latch the clips.

WARNING

Operating the engine with the air

cleaner removed can cause you or oth-
ers to be burned. The air cleaner not
only cleans the air, it stops the flame if
the engine backfires. If it isn’t there, and
the engine backfires, you could be
burned. Do not drive with the air cleaner
removed, and be careful when working
on the engine with the air cleaner
removed.

Never pour fuel into the throttle body or

attempt to start the engine with the air
cleaner removed. Doing so could result
in serious injury.

IN-CABIN MICROFILTER

The in-cabin microfilter restricts the entry of air-
borne dust and pollen particles and reduces
some objectionable outside odors. The filter is
located behind the glove box. Refer to the
“NISSAN Service and Maintenance Guide” for
change intervals.

If replacement is required, see your NISSAN
dealer.

CLEANING

If your windshield is not clear after using the
windshield-washer or if a wiper blade chatters
when running, wax or other material may be on
the blade or windshield.

Clean the outside of the windshield with a washer
solution or a mild detergent. Your windshield is
clean if beads do not form when rinsing with clear
water.

Clean each blade by wiping it with a cloth soaked
in a washer solution or a mild detergent. Then
rinse the blades with clear water. If your wind-
shield is still not clear after cleaning the blades
and using the wiper, install new windshield wiper
blades.

CAUTION

Worn windshield wiper blades can dam-
age the windshield and impair driver
vision.

VQ35DE

LDI0562

WINDSHIELD WIPER BLADES

8-20

Maintenance and do-it-yourself

Advertising