NISSAN 2010 Altima Hybrid - Quick Reference Guide - Manual (Page 9)

7
CRUISE CONTROL
To activate the cruise control, push the ON/OFF
switch. The cRuiSe indicator light in the Vehicle
information display will illuminate.
To set cruising speed, accelerate the vehicle to
the desired speed, push the COAST/SET switch
and release it. The SeT indicator light in the
Vehicle information display will illuminate.
To reset at a faster cruising speed, push and hold
the ACCEL/RES switch. When the vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch. Release the
switch when the vehicle slows to the desired speed.
To cancel cruise control, push the CANCEL switch or tap the brake pedal. The SeT indicator
light in the Vehicle information display will go out.
To resume a preset speed, push and release the ACCEL/RES switch. The vehicle returns to
the last set cruising speed when the vehicle speed is over 25 MPH (40 km/h).
To turn off cruise control, push the ON/OFF switch. Both the cRuiSe indicator light and the
SeT indicator light in the Vehicle information display will go out.
AUTOMATIC CLIMATE CONTROL
01
AUTO BUTTON
Press the AUTO button 01
. Turn the driver’s side temperature control dial
02 to the
desired temperature. This will allow the fan speed, air flow distribution and temperature to
be automatically maintained.
When AUTO is pressed, AUTO will illuminate. When DUAL 03
is pressed, DUAL will
illuminate.
To disable auto mode, press one of the air flow mode control buttons 05
, turn the fan
speed control dial 06
or press the front defroster control button
07
.
02
DRIVER’S SIDE TEMPERATURE CONTROL DIAL
Turn the driver’s side temperature control dial left for cold air or right for hot air.
01
02 04
06
09 10 07 08 03
05