Cruise control – NISSAN 2012 Armada - Quick Reference Guide User Manual

Page 11

Advertising

To view detailed instructional videos regarding these and other features,

please go to www.nissanownersinfo.mobi.

station sElECt Buttons

eighteen stations can be set in any combination of fM, AM and XM satellite radio stations.

To store a station in a preset, first select a preset bank A, B or c by pressing the

PrEsEt a·B·C button

Then select the radio band by pressing the AM•FM/SAT button

and tune to the

desired AM, fM or XM satellite radio station.

Next, press and hold the desired station select button (1-6) until a beep is heard and the

sound is briefly muted. The channel indicator will appear and the sound will resume.
Programming is now complete.

To retrieve a previously set station, select the radio band where the preset was stored

then press the corresponding station select button (1-6).

for more information, refer to the “monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.

CruisE Control

The cruise control system enables you to set a constant
cruising speed once the vehicle has reached 25 mph.

The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.

To activate the cruise control, push the ON•OFF
switch

. The CruisE indicator light in the

vehicle information display will illuminate.

To set cruising speed, accelerate the vehicle to the
desired speed, push the COAST•SET switch

and release. The sEt indicator light in the vehicle

information display will illuminate. Take your foot off
the accelerator pedal. Your vehicle will maintain the set speed.

To reset at a faster cruising speed, push and hold the ACCEL•RES switch

. When the

vehicle attains the desired speed, release the switch.

To reset at a slower cruising speed, push and hold the COAST•SET switch

. Release

the switch when the vehicle slows to the desired speed.

To cancel the preset speed, tap the brake pedal or push the CanCEl switch

To turn off cruise control, push the ON•OFF switch

. Both the CruisE

indicator light and sEt indicator light in the vehicle information display will turn off.

for more information, refer to the “starting and driving (section 5)” of your Owner’s Manual.

Advertising