NISSAN 2012 Armada - Quick Reference Guide - Manual (Page 6)

4
first drive features
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
PoWEr sEat aDJustmEnts (if so equipped)
To slide the seat forward or backward, push the
control switch 01
forward or backward.
To adjust the angle of the seatback, push the switch
02
forward or backward.
SeAT LifTeR (driver’s seat only)
To adjust the angle and height of the seat cushion,
push the front or rear end of the switch
01
up
or down.
MAnuAL LuMBAR SuPPORT (driver’s seat only)
To adjust the lumbar area, move the lever 03
up or down.
for more information, refer to the “safety –– seats, seat belts and supplemental restraint system (section 1)” of your
Owner’s Manual.
01 02
03
automatiC DrivE PositionEr (if so equipped)
Two positions for the driver’s seat, accelerator and
brake pedals and outside mirrors can be stored in
the automatic drive positioner memory.
follow these procedures to set the memory positions:
• Confirm the shift lever is in the P (Park) position.
• Place the ignition switch in the on position.
• Adjust the driver’s seat, accelerator and brake
pedals and outside mirrors to the desired positions
using the adjusting switches for each feature.
• Push the sEt switch and within 5 seconds, push the memory switch (1 or 2) for at least
1 second.
• The indicator light on the memory switch you select will illuminate for approximately 5 seconds.
• The driver’s seat, accelerator and brake pedals and outside mirror positions are now set to
your preference.
These memorized positions can also be linked to your niSSAn intelligent key ® .
for more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.