First drive features, Cruise control, Interface – NISSAN 2015 Armada - Quick Reference Guide User Manual

Page 14

Advertising
background image

To view detailed instructional videos regarding these and other features,

please go to www.nissanownersinfo.mobi.

12

CRUISE CONTROL

The cruise control system enables you to set a

constant cruising speed once the vehicle has
reached 25 mph (40 km/h).

The system will automatically maintain the set

speed until you tap the brake pedal, accelerate,
cancel or turn the system off.

To activate the cruise control, push the ON/OFF

switch

1

. The CRUISE indicator light in the

vehicle information display will illuminate.

To set a cruising speed, accelerate the vehicle to the desired speed, push the

COAST/SET switch

2

and release. The SET indicator light in the vehicle

information display will illuminate. Take your foot off the accelerator pedal. Your vehicle
will maintain the set speed.

To reset at a faster cruising speed, push and hold the ACCEL/RES switch

3

.

When the vehicle attains the desired speed, release the switch.

4

3

2

1

USB (Universal Serial Bus) CONNECTION PORT/

AUX JACK AND iPOD

®

INTERFACE

The USB port/Aux jack

1

is located in the center

console under the armrest.

When a compatible USB memory device, iPod

®

or

auxiliary device is plugged into the USB port/Aux jack,

compatible audio files stored on the device can be

played through the vehicle’s audio system.

For more information, refer to the “Monitor, climate, audio, phone and
voice recognition systems (section 4)”
of your Owner’s Manual.

1

4

STATION PRESET BUTTONS

Six stations can be set for the AM band, 12 for the FM band and 18 for satellite radio.

To store a station in a preset, you must first select a radio band by pressing the

AM/FM button

5

or XM button

6

then tune to the desired AM, FM or satellite

radio station.

Then press and hold the desired station preset button (1-6) until the preset number is

updated on the display and the sound is briefly muted. The channel indicator will then

come on, and the sound will resume. Programing is now complete.

To retrieve a previously set station, select the radio band where the preset was stored

then press the corresponding station select button (1-6).

For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)”
of your Owner’s Manual.

FIRST DRIVE FEATURES

1758973_15b_Armada_QRG_091714.indd 12

9/17/14 1:00 PM

Advertising