NISSAN 2015 Armada - Quick Reference Guide - Manual (Page 9)

To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi. 7
3 RD ROW POWER FOLDING SEATS (if so equipped)
Before operating the 3 rd row seats:
• Make sure the 2 nd row seatback is not reclined.
• Lower the 3 rd row headrest to the full down position.
• Disconnect and secure the center seat belt and tongue into the retractor base. Always
reconnect the center seat belt when the seat is returned to the upright position.
• Make sure that there are no objects on the seatback cushion.
The 3
rd row power folding seat controls are located behind the 2 nd row seat (passenger’s
side) on the 3 rd row cup holder console 1
and
on the rear quarter trim panel behind the 3 rd row
seats (passenger’s side) 2 .
To fold down the 3 rd row seats, push and hold the
bottom portion of the switch.
To raise the 3 rd row seats, push and hold the top
portion of the switch.
If the ignition switch is in the OFF position, the
power folding seats are always operational.
If the ignition switch is in the ON position,
the power folding seats are only operational
when the shift lever is in the P (PARK) or N
(NEUTRAL) position.
For more information, refer to the “Safety –– Seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.
AUTOMATIC DRIVE POSITIONER (if so equipped)
Two positions for the driver’s seat, accelerator
and brake pedals and outside mirrors can be
stored in the automatic drive positioner memory.
Follow this procedure to set the memory positions:
• Confirm the shift lever is in the
P (PARK) position.
• Place the ignition switch in the ON position.
• Adjust the driver’s seat, accelerator and brake
pedals and outside mirrors to the desired positions using the adjusting switches for
each feature.
• Push the SET switch and within 5 seconds push the memory switch (1 or 2) for at
least 1 second.
• The indicator light on the memory switch you select will illuminate for approximately
5 seconds.
• The driver’s seat, accelerator and brake pedals and outside mirror positions are now
set to your preferences.
These memorized positions can also be linked to your NISSAN Intelligent Key ® .
To link a memorized position to your NISSAN Intelligent Key ® , press the unlock button
on the key fob after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
1
2
1758973_15b_Armada_QRG_091714.indd 7 9/17/14 1:00 PM