NISSAN 2013 Frontier - Owner's Manual User Manual

Page 64

Advertising
background image

6. After attaching the child restraint, test it be-

fore you place the child in it. Push it from side
to side while holding the child restraint near
the LATCH attachment path. The child re-
straint should not move more than 1 inch
(25 mm), from side to side. Try to tug it
forward and check to see if the LATCH at-
tachment holds the restraint in place. If the
restraint is not secure, tighten the LATCH
attachment as necessary, or put the restraint
in another seat and test it again. You may
need to try a different child restraint. Not all
child restraints fit in all types of vehicles.

7. Check to make sure the child restraint is

properly secured prior to each use. If the
child restraint is loose, repeat steps 3
through 6.

FORWARD-FACING CHILD
RESTRAINT INSTALLATION USING
LATCH — JUMP SEAT (King cab
models only)

WARNING

A child restraint system will not be in-

stalled properly and the child could be
seriously injured or killed in a sudden
stop or collision.

– Do not install a child restraint system

on the passenger’s side jump seat
without unfolding the seat extender.

Forward-facing – step 6

WRS0697

LRS0598

Safety—Seats, seat belts and supplemental restraint system

1-45

Advertising