NISSAN 2014 Frontier - Quick Reference Guide - Manual (Page 14)

12
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
TRIP COMPUTER
With the ignition switch in the ON position, modes of the
trip computer 01
can be selected by pressing the trip
computer change button 02
on the instrument panel.
The following modes can be selected in the display:
• Trip A – measures the distance of one specific trip.
• Trip B – measures the distance of a second specific trip.
• dte (distance to empty) – displays the estimated distance to empty (dte) the vehicle can be
driven before refueling.
• mph – displays the average speed since the last reset.
• mpg – displays the average fuel consumption since the last reset.
• (Journey time) – displays the elapsed time since the last reset.
To reset Trip A, Trip B, mph, mpg and (Journey time), go to the desired mode on the trip
computer and hold the trip computer change button 02
for more than 3 seconds.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
01
BLUETOOTH ® HANDS-FREE PHONE SYSTEM (if so equipped)
A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTEM OPERATING TIPS
Press the
button to interrupt the voice prompts
at any time and speak a command after the tone.
To use the system faster, you may speak the second
level commands with the main menu command on
the main menu. For example, press the
button
and after the tone say “Call Redial”.
The “Help” command can be used to hear a list of
available commands at any time.
Reduce background noise as much as possible by
closing windows and pointing HVAC vents away
from the ceiling.
Speak naturally without long pauses and without
raising your voice.
When speaking Phonebook names, please be
aware some phones require the last name to be spoken before the first name. For example,
“Michael Smith” may be spoken as “Smith Michael”.
To cancel a voice recognition session, simply wait 5 seconds, say “Cancel” or “Quit”, or
press and hold the button for 5 seconds.
To increase or decrease the volume of the voice prompts, push the volume control switches
+ or - on the steering wheel or turn the control dial on the audio system while the audio
system is responding.
SYSTEM GUIDE
*Some jurisdictions prohibit the use of cellular telephones while driving.
02
1667122_14b_Frontier_QRG_020414.indd 12 2/4/14 1:43 PM