First drive features, Outside mirror control switch, Starting/stopping the engine – NISSAN 2014 Frontier - Quick Reference Guide User Manual

Page 8

Advertising
background image

6

To view detailed instructional videos regarding these and other features,

please go to www.nissanownersinfo.mobi.

OUTSIDE MIRROR CONTROL SWITCH

The outside mirror control switch is located on the

left side of the instrument panel.

To select the left or right mirror, move the switch

01

.

Adjust each mirror to the desired position using the

switch

02

.

To prevent accidentally moving the mirror, move

switch

01

to the center (neutral) position.

For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.

STARTING/STOPPING THE ENGINE

AUTOMATIC TRANSMISSION (if so equipped)
Depress the brake pedal.
Move the shift lever to P (PARK).
Turn the ignition switch to START.

MANUAL TRANSMISSION (if so equipped)
Depress the brake pedal.
Move the shift lever to N (NEUTRAL).
Depress the clutch pedal to the floor.
Turn the ignition switch to START.

TURNING THE ENGINE OFF
For an automatic transmission, move the shift lever to the P (PARK) position, apply the parking

brake and turn the ignition switch to the LOCK position.

For a manual transmission, apply the foot brake, move the shift lever to 1st gear, apply the

parking brake and turn the ignition switch to the LOCK position.

For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.

01

02

FIRST DRIVE FEATURES

1667122_14b_Frontier_QRG_020414.indd 6

2/4/14 1:43 PM

Advertising