NISSAN 2011 GT R - Owner's Manual - Manual (Page 16)

Black plate (10,1)
Model "R35-D" EDITED: 2009/ 12/ 11
The body of the GT-R has been manufactured
on special fixtures utilizing a hybrid structure
with aluminum die cast parts for the frame work.
Special skills, information and equipment are
required to correctly repair the body. Contact a
GT-R certified NISSAN dealer if the vehicle is
damaged, such as in a collision, and they will
recommend an appropriate body shop.
Only certified body shops using CELETTE
®
advanced collision repair equipment are ap-
proved by NISSAN for repairing structural body
damage. Contact a GT-R certified NISSAN
dealer or NISSAN Consumer Affairs for a
referral or list of certified body shops.
The information and specifications in this
section apply only when engaging in
performance driving.
The following information applies only if you
engage in performance driving such as driving
your GT-R for extended periods under the
following conditions.
. Higher-RPM (approaching redline) opera-
tion
. Frequent high pedal force braking from
moderate and higher speeds
. Frequent throttle activation
. Fast revving throughout the RPM range
In such cases, the following additional main-
tenance guidelines apply.
However, you should also carefully read
your 2011 NISSAN GT-R Warranty Informa-
tion Booklet for important information
concerning warranty coverage, limitations
and exclusions.
We recommend that maintenance be performed
at a GT-R certified NISSAN dealer. NISSAN will
only pay for GT-R Performance Optimization
Services performed at a GT-R certified NISSAN
dealer.
FLUIDS
The information and specifications in this
section apply only when engaging in
performance driving.
. Before driving, check the fluid levels and
adjust as necessary using the specified fluid
as described under the conditions listed in
ADDITIONAL MAINTENANCE ITEMS. If you
do not drive under the conditions listed, refer
to the 2011 Service Maintenance Guide.
GTR-8 GT-R Overview
BODY REPAIR ADDITIONAL MAINTENANCE ITEMS