NISSAN 2011 GT R - Multi Function Display Owner's Manual - Manual (Page 169)

Black plate (173,1)
Model "R35-N" EDITED: 2009/ 10/ 30
2. Operate the driver side temperature control
dial to set the desired temperature.
Adjust the temperature to about 75 8F
(24 8C) for normal operation.
. The temperature of the passenger com-
partment will be maintained automati-
cally. Air flow distribution and fan speed
will also be controlled automatically.
3. You can individually set driver and front
passenger side temperature using each
temperature control dial. When <PUSH
DUAL> the passenger side temperature
control dial is operated, the DUAL indicator
will come on. To turn off the passenger side
temperature control, push <PUSH DUAL>.
A visible mist may be seen coming from the
ventilators in hot, humid conditions as the air is
cooled rapidly. This does not indicate a mal-
function.
HEATING (A/C OFF)
The air conditioner does not activate in this
mode. When you need to heat only, use this
mode.
1. Push <A/C>. The A/C indicator will turn off.
Heater and air conditioner 5-3