NISSAN 2014 GT R - Service & Maintenance Guide - Manual (Page 21)

Brakes
* Check for the heat deterioration of the brakes and parts
around the brakes.
* It is recommended that you remove air from the brake
system after any of the following:
● When engaging in high performance driving for the first
time after purchasing a new vehicle.
● After replacing the brake fluid.
● When engaging in high performance driving for a sus-
tained period of time. It is recommended that bleeding
the brake be performed when the brake calipers are
hot (about 212°F (100°C)).
Brake Pad:
* NISSAN recommends adding an additional cross spring
to the front calipers before engaging in performance driv-
ing. The additional spring reduces brake pad movement
resulting from cornering forces and will reduce the stroke
of the brake pedal. Contact a GT-R certified NISSAN
dealer to purchase the spring and arrange installation. If a
cross spring is added, a clattering or squeaking sound
may be heard on rare occasions.
Brake Pad Break-in Procedure:
NISSAN recommends that a special brake pad break in
procedure be performed before engaging in performance
driving. Contact a GT-R certified NISSAN dealer for de-
tails.
INSPECTION AND ADJUSTMENTS AFTER PER-
FORMANCE DRIVING
NOTICE: At the completion of performance driving,
all fluid and other adjustments should be returned
to the normal fluid specifications.
Fluids
* Check the engine, transmission, differential and under
the vehicle for oil and coolant leaks.
* Check the fluid levels and adjust as necessary using the
specified fluid as described under the conditions listed in
RECOMMENDED FLUIDS AND MAINTENANCE IN-
TERVAL on the following page.
* When changing fluids, be sure to use the specified fluids as
described in the RECOMMENDED FUELS/LUBRICANTS
Chart in the Technical and Consumer Information section of
your owner’s manual.
ADDITIONAL MAINTENANCE ITEMS
20