NISSAN 2014 GT R - Multi Function Display Owner's Manual - Manual (Page 254)

No. Item Large panel Small panel
13 Brake pedal — *
14 Steering —
*
15 Cornering g-force * *
16 Accel/Braking g-force * *
17 Total g-force * *
18 Clock — *
19 Reset the CUSTOM VIEW #(1-4) to Default * *
INFO:
. Each panel selected will be saved
. Panels will remain saved in the system even
after the engine is turned off.
. Two of the same panels cannot be displayed
at the same time.
. Two of the same panels of different sizes
cannot be displayed at the same time.
. Panels that have not been assigned a
display item remain empty.
Initializing display
The modified display will return to the screen
that was first configured.
1. Display the screen you would like to initialize
and push <ENTER>.
2. Select the panel and push <ENTER>.
3. Highlight [Reset the CUSTOM VIEW 1 to
Default] and push <ENTER>.
INFO:
When operating the touch panel to initialize the
display, the same procedure used to select a
meter is performed.
“Select using touch panel” (page 10-8)
Multi function meter 10-9