1.2 daily inspection, 1.3 insulated tools, 2 vehicle immobilization and stabilization – NISSAN 2012 LEAF - First Responder's Guide User Manual

Page 13: 2.1 setting the electric parking brake, 1.2. daily inspection, 1.3. insulated tools, 2.1. setting the electric parking brake

Advertising
background image

Preparation Items

Specification

Purpose

S

olvent resistant protection

gloves
Solvent resistant protection
shoes

To utilize in the event of a Li-ion battery
electrolytic solution leak.

Absorbent pad

The same pad used for internal com-
bustion engine fluids can be used.

To absorb any Li-ion battery electrolytic
solution leakage.

Standard fire fighting
equipment

Standard fire fighting equipment
Depending on type of fire (vehicle or
battery) use standard fire fighting
equipment (water or extinguisher).

To extinguish a fire.

Insulated tape

Insulating

To cover any damaged harnesses to
protect from and prevent electrical
shock. Tape should cover all bare or
damaged wire.

3-1.1 PPE (Personal Protective Equipment) Protective Wear Control

Perform an inspection of the PPE items before beginning work. Do not use any damaged PPE items.

3-1.2 Daily Inspection

This inspection is performed before and after use. The responder who will be using the items should
perform the inspection and check for deterioration and damage.

• Insulated rubber gloves should be inspected for scratches, holes and tears. (Visual check and air

leakage test)

• Insulated safety boots should be inspected for holes, damage, nails, metal pieces, wear or other

problems on the soles. (Visual check)

• Insulated rubber sheet should be inspected for tears. (Visual check)

3-1.3 Insulated Tools

When performing work at locations where high voltage is applied (such as terminals), use insulated tools
meeting 1,000V/300A specifications.

3-2 Vehicle Immobilization and Stabilization

3-2.1 Setting the Electric Parking Brake

1. Firmly apply the brake pedal.
2. Place the vehicle in P (Park) by pressing the “P” button in the selector lever.
3. Pull up on the electric parking brake switch.

If possible, immobilize the vehicle with the electrically operated parking brake before turning the
12V system OFF and stabilize it with a wheel chock(s). Stabilize the vehicle with cribbing, by
removing air from the tires, or utilize the Lift Airbag Equipment for rescue.

AAYIA0102ZZ

13

Advertising