3 removing the service plug – NISSAN 2012 LEAF - Roadside Assistance Guide User Manual

Page 36

Advertising
background image

5-3 Removing the Service Plug

Do not remove the service plug without always wearing appropriate PPE to help

protect the responder from serious injury or death by electrical shock.

Immediately cover the service plug socket with insulated tape. The Li-ion battery

retains high voltage power even when the service plug is removed. To avoid electric
shock, DO NOT touch the terminals inside the socket.

To avoid unintended reinstallation and risk of electrical shock and severe personal injury

or death, the service plug should be securely stored away from the vehicle while the vehicle
is in storage.

1. Check the READY

indicator status. If it is ON, the high voltage system is active.

2. Place the selector lever in the Park (P) position.
3. Press the power switch once to turn OFF the high

voltage system. Then verify whether the READY
indicator is OFF.

4. Locate the carpet flap (1) behind the center console on

the floor raised area. At the notched area (A) pull up on
the carpet flap (1).

NOTE:

: Arrow in illustration depicts vehicle front

direction.

AAYIA0091ZZ

AAYIA0116ZZ

36

Advertising