System guide, Bluetooth, Hands-free phone system – NISSAN 2015 LEAF - Quick Reference Guide User Manual

Page 23: System without navigation (if so equipped)

Advertising
background image

To view detailed instructional videos regarding these and other features,

please go to www.nissanownersinfo.mobi.

20

BLUETOOTH

®

HANDS-FREE PHONE SYSTEM

A cellular telephone should not be used while driving so full attention may be given to

vehicle operation.*

SYSTEM OPERATING TIPS
Press the

or button to interrupt the voice

prompts at any time and speak a command after
the tone.

To use the system faster, you may speak the second

level commands with the main menu command on
the main menu. For example, press the

or

button and after the tone say “Call Redial”.

The “Help” command can be used to hear a list

of available commands at any time.

Reduce background noise as much as possible

by closing windows and pointing HVAC vents
away from the ceiling.

Speak naturally without long pauses and without raising your voice.
When speaking Phonebook names, please be aware some phones require the last

name to be spoken before the first name. For example, “Michael Smith” may be
spoken as “Smith Michael”.

To cancel a Voice Recognition session, simply wait 5 seconds, say “Cancel” or “Quit”,

or press and hold the

button for 5 seconds.

To increase or decrease the volume of the voice prompts, push the volume control

switches + or - on the steering wheel or turn the control dial on the audio system

while the audio system is responding.

If the Voice Recognition system does not recognize your voice commands, train the system

using the Voice Adaptation Mode. See your Owner’s Manual for detailed information.

For more detailed information and instructions, see your cellular phone’s Owner’s

Manual and visit www.nissanusa.com/bluetooth.

BLUETOOTH

®

SYSTEM WITHOUT NAVIGATION (if so equipped)

CONNECTING PROCEDURE
The vehicle must be stationary when connecting

the phone.

1. Press the

button on the steering wheel.

The system announces the available commands.

2. Say: “Connect phone”. The system

acknowledges the command and announces
the next set of available commands.

3. Say: “Add phone”. The system acknowledges

the command and asks you to initiate connecting from the phone handset.

*Some jurisdictions prohibit the use of cellular telephones while driving.

SYSTEM GUIDE

Bluetooth

®

Controls

Microphone

1789594_15b_Leaf_QRG_063014.indd 20

6/30/14 1:29 PM

Advertising