NISSAN 2009 Maxima - Quick Reference Guide - Manual (Page 12)

DISC·AUX BUTTON
Press the DISC·AUX button to play a CD loaded into the CD player. Press the
DISC·AUX button again to play an iPod
ா, if a compatible iPodா is connected (if so
equipped). Press the DISC·AUX button again to play music recorded to the Music Box
hard-disk drive (if so equipped). Press the DISC·AUX button again to play the
CompactFlash™ Drive (if so equipped), if a card is in the drive. Press the DISC·AUX
button again to play a compatible device such as an MP3 player when it is plugged into
the auxiliary jacks located in the center console (cable not included).
NOTE:
Ⅲ For vehicles equipped with a color control panel display, video playback from the
auxiliary audio/video input jacks is only available while the vehicle is parked and the
parking brake engaged.
Ⅲ You may need to adjust the volume on any compatible device plugged into the
auxiliary jack to find the most desired sound level of the audio system.
TUNE/FOLDER AND AUDIO KNOB (Bass, Treble, etc.)
Ⅲ To manually tune the radio, turn the TUNE/FOLDER/AUDIO knob. If playing a CD
that is formatted with MP3/WMA folders, turn the TUNE/FOLDER/AUDIO knob to
scroll through the available folders.
Ⅲ Adjust
the Bass, Treble, Balance and Fade by pressing the
TUNE/FOLDER/AUDIO knob until the desired mode appears in the display. Then
turn the TUNE/FOLDER/AUDIO knob to adjust to the desired level.
SEEK/CAT AND TRACK BUTTONS
Ⅲ To scan quickly through each broadcasting station, press the SEEK/CAT or the
TRACK button.
Ⅲ To skip from one track to another on a CD, press the SEEK/CAT or the TRACK
button. Each time the button is pressed, the CD will advance or skip back one track.
Ⅲ When the SEEK/CAT or the TRACK button is pressed and held while a CD is
playing, it will rewind or fast forward. When the button is released, the CD will play at
normal speed.
RPT/RDM BUTTON
To change the play pattern of the CD or Music Box Hard-Disk Drive Audio System (if so
equipped), press the RPT/RDM button.
SCAN BUTTON
Press the SCAN button while listening to a radio station (FM, AM or XM
ா). The radio will
stop at each station that has significant signal strength for 5 seconds. Pressing the
SCAN button again during this 5-second period will stop scan tuning and the radio will
remain tuned to that station. If the SCAN button is not pressed within 5 seconds, scan
tuning moves to the next station.
*XM
ா Satellite Radio is only available on vehicles equipped with optional XMா satellite
subscription service.
10