How to use the setting button -9 – NISSAN 2010 Maxima - Owner's Manual User Manual

Page 170

Advertising
background image

Displaying the maintenance notice re-
minder

Select the “Interval Reminder ON” key to display
the MAINTENANCE INFORMATION automati-
cally at the set maintenance interval. The indica-
tor light will illuminate when it is ON.

The MAINTENANCE NOTICE screen will be au-
tomatically displayed as shown when both of the
following conditions are met:

● The vehicle is driven the set distance and the

ignition switch is placed in the OFF position.

● The ignition switch is placed in the ON po-

sition the next time the vehicle will be driven.

To return to the previous display after the MAIN-
TENANCE NOTICE screen is displayed, press
the BACK button.

The MAINTENANCE NOTICE screen displays
each time the key is turned ON until one of the
following conditions are met:

● The “Reset” key is selected.
● The “Interval Reminder ON” key is set to

OFF (indicator light not illuminated).

● The maintenance interval is set again.

HOW TO USE THE SETTING
BUTTON

When the SETTING button is pressed, the Set-
tings screen will appear on the display. You can
select and/or adjust several functions, features
and modes that are available for your vehicle. Use
the NISSAN controller to select each item to be
set.

Audio settings

For audio settings, refer to “Audio System” in this
section.

LHA0839

LHA1304

Monitor, climate, audio, phone and voice recognition systems

4-9

Advertising