Installing top tether strap -35 – NISSAN 2010 Maxima - Owner's Manual User Manual

Page 52

Advertising
background image

10. If the child restraint is installed in the front

passenger seat, place the ignition switch in
the ON position. The front passenger air bag
status light

should illuminate. If this

light is not illuminated see

ЉFront passenger

air bag and status light

Љ in this section.

Move the child restraint to another
seating

position.

Have

the

system

checked by a NISSAN dealer.

After the child restraint is removed and the seat
belt is fully retracted, the ALR mode (child re-
straint mode) is canceled.

INSTALLING TOP TETHER STRAP

First, secure the child restraint with the LATCH
lower anchors (rear outboard seat positions only)
or the seat belt, as applicable.

1. Flip up the anchor cover

1

from the anchor

point which is located directly behind the
child seat.

2. If necessary, raise or remove the headrest to

position the top tether strap over the top of
the seatback. If the headrest is removed,
store it in a secure place. Be sure to reinstall
the headrest when the child restraint is re-
moved. See “Adjustable headrest” in
this section for headrest adjustment,
removal and installation information.

3. Secure the tether strap to the tether anchor

point on the rear parcel shelf.

4. Refer to the appropriate child restraint in-

stallation procedure steps in this section
before tightening the tether strap.

If you have any questions when installing a
top tether strap, consult your NISSAN
dealer for details.

Forward-facing – step 10

LRS0865

LRS0243

Safety—Seats, seat belts and supplemental restraint system

1-35

Advertising