Essential information, Tire pressure monitoring system (tpms), Loose fuel cap – NISSAN 2013 Maxima - Quick Reference Guide User Manual

Page 4

Advertising
background image

To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi

tirE PrEssurE monitorinG systEm (tPms)

A ChECk tirE PrEssurE warning message will
appear in the vehicle information display

01

and the

low tire pressure warning light

02

will

illuminate when one or more tires are
low on pressure and air is needed.
• The tire pressures should be checked when the
tires are cold. The tires are considered cold after
the vehicle has been parked for 3 hours or more or
driven less than 1 mile (1.6km) at moderate speeds.
After tire pressures are adjusted, drive the vehicle
at speeds above 16 MPH (25km/h). The ChECk
tirE PrEssurE
warning message and low tire
pressure warning light will disappear.
When the low tire pressure warning light flashes for 1 minute and then remains on, the TPMS
is not functioning properly. Have the system checked by a NISSAN dealer.
Tire pressure rises and falls depending on the heat caused by the vehicle’s operation and the
outside temperature. Low outside temperature can lower the temperature of the air inside the
tire, which can cause a lower tire inflation pressure. This may cause the low tire pressure
warning light to illuminate. If the warning light illuminates, check the tire pressure in your tires.
• Check the tire pressure (including the spare tire) often and always prior to long distance trips.
The Tire and Loading Information label contains valuable information. Please refer to section 9,
“Technical and consumer information”, in your Owner’s Manual for the location of the Tire and
Loading Information label.

For more information, refer to the “instruments and controls (section 2)”, the “starting and driving (section 5)” and the
“maintenance and do-it-yourself (section 8)” of your Owner’s Manual.

loosE fuEl CaP

A loosE fuEl CaP warning message will appear
in the vehicle information display

01

when the fuel-

filler cap is not tightened correctly.
To tighten, turn the cap clockwise until a single click
is heard.
The warning message will disappear when the vehicle
detects the fuel-filler cap is properly tightened and the
reset button

02

is pressed for about 1 second.

If the cap is not properly tightened the Malfunction
Indicator Light

may illuminate.

For more information, refer to the “instruments and controls (section 2)”
and the “Pre-driving checks and adjustments (section 3)” of your
Owner’s Manual.

essential information

2

02

01

02

01

1351487_13b_Maxima_QRG_010813b.indd 2

1/8/13 2:12 PM

Advertising