NISSAN 2012 Murano - Quick Reference Guide - Manual (Page 11)

rear SeaT eNTrY/eXIT (CrossCabriolet models)
DRIVER’S SIDE
To enter the rear seat, push and hold the front end of
the slide switch
01
to slide the driver’s seat forward.
Then push and hold the front end of the reclining
switch
02
until the desired angle is obtained.
To exit the rear seat from the driver’s side, pull the
strap
03
behind the driver’s seat to release the
driver’s seatback. The driver’s seatback will tilt
forward so that you can exit the vehicle.
PASSENGER’S SIDE
To fold down the front passenger’s seatback and
unlock the seat position, push the front passenger’s
seatback switch
04
.
Manually slide the seat forward to the foremost
position.
Enter or exit the back seat.
01
02
03
04
9
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
REcLINING THE REAR SEATS
NOTE: Brace the back of the seat with your arm while
pulling on the strap. The seatback will release quickly.
Pull the reclining strap 01
and move the seatback
to the desired angle.
Release the reclining strap after positioning the seat
at the desired angle.
For more information, refer to the “Safety – Seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.
01