Installing top tether strap -40 – NISSAN 2011 Pathfinder - Owner's Manual User Manual

Page 61

Advertising
background image

9. Check to make sure the child restraint is

properly secured prior to each use. If the
seat belt is not locked, repeat steps 2
through 8.

10. If the child restraint is installed in the front

passenger seat, place the ignition switch in
the ON position. The front passenger air bag
status light

should illuminate. If this

light is not illuminated see “Front passenger
air bag and status light” in this section.
Move the child restraint to another
seating

position.

Have

the

system

checked by a NISSAN dealer.

After the child restraint is removed and the seat
belt is fully retracted, the ALR mode (child re-
straint mode) is canceled.

INSTALLING TOP TETHER STRAP

First, secure the child restraint with the LATCH
lower anchors (rear outboard seat positions only)
or the seat belt, as applicable.

1. If necessary, raise or remove the head re-

straint to position the top tether strap over
the top of the seatback

1

. If the head

restraint is removed, store it in a secure
place. Be sure to reinstall the head restraint
when the child restraint is removed. See
“Head restraints” in this section for
head restraint adjustment, removal
and installation information.

Forward-facing – step 10

WRS0475

LRS0659

1-40

Safety—Seats, seat belts and supplemental restraint system

Advertising
This manual is related to the following products: