Variable voltage control system -18 drive belt -18 – NISSAN 2012 Pathfinder - Owner's Manual User Manual

Page 409

Advertising
background image

CAUTION

Do not ground accessories directly to

the battery terminal. Doing so will by-
pass the variable voltage control sys-
tem and the vehicle battery may not
charge completely.

Use electrical accessories with the en-

gine running to avoid discharging the
vehicle battery.

Your vehicle is equipped with a variable voltage
control system. This system measures the
amount of electrical discharge from the battery
and controls voltage generated by the generator.

The current sensor

A

is located near the battery

along the negative battery cable. If you add elec-
trical accessories to your vehicle, be sure to
ground them to a suitable body ground such as
the frame or engine block area.

1.

Power steering fluid pump

2.

Automatic belt tensioner

3.

Idler pulley

4.

Cooling fan

5.

Air conditioner compressor

6.

Crankshaft pulley

7.

Generator

LDI0454

VQ40DE

WDI0674

VARIABLE VOLTAGE CONTROL
SYSTEM

DRIVE BELT

8-18

Maintenance and do-it-yourself

Advertising
This manual is related to the following products: