First drive features, Starting/stopping the engine, Outside mirror control switch – NISSAN 2015 Pathfinder - Quick Reference Guide User Manual

Page 14

Advertising
background image

To view detailed instructional videos regarding these and other features,

please go to www.nissanownersinfo.mobi.

12

STARTING/STOPPING THE ENGINE

It is important to make sure the NISSAN Intelligent Key

®

is with you (that is, in your pocket or purse).
Depress the brake pedal.
Press the ignition switch START/STOP button to

start the engine.

TURNING THE ENGINE OFF
Move the shift lever to the P (PARK) position and apply the parking brake.
Press the ignition switch START/STOP button to turn the engine off.

For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.

FIRST DRIVE FEATURES

OUTSIDE MIRROR CONTROL SWITCH

To select the right or left side mirror, move the

control switch

1

right or left.

Adjust each mirror to the desired position using

the switch

2

.

REVERSE TILT-DOWN FEATURE (if so equipped)
The reverse tilt-down feature will turn both outside mirror surfaces downward to provide

better rear visibility close to the vehicle.

1. Apply the brake.
2. Push the ignition switch to the ON position.
3. Move the shift lever to the R (REVERSE) position.
4. Outside mirror surfaces move downward. (The mirror control switch

1

must be out

of the center position.)

The outside mirror surfaces will return to their original position when one of the following

conditions has occurred:

1. The shift lever is moved to any position other than R (REVERSE).
2. The outside mirror control switch

1

is set to the center (neutral) position.

3. The ignition switch is placed in the OFF position.

For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.

1

2

1758976_15b_Pathfinder_QRG_091014.indd 12

9/10/14 12:07 PM

Advertising