NISSAN 2014 Quest - Owner's Manual - Manual (Page 456)

STI0820
Use the following steps to mount the license
plate.
Before mounting the license plate, confirm that
the following parts are enclosed in the plastic
bag.
. License plate bracket
. Screw 6 2 (for license plate bracket)
1. Park the vehicle on flat, level ground.
2. Line up the tab
*
A on the license plate
bracket under the top of the front bumper
*
B .
3. Install the license plate bracket with screws.
4. Install the license plate with screws (sold
separately).
Use a screw of 1/4 inch (6 mm) in diameter
and approximately 5/8 inch (16 mm) in
length.
Technical and consumer information 9-11
INSTALLING FRONT LICENSE PLATE