NISSAN 2012 Rogue - Owner's Manual - Manual (Page 107)

2-36 Instruments and controls
HEADLIGHT SWITCH
Lighting
*
1 Turn the switch to the position:
The front park, side marker, tail, license plate and
instrument lights will come on.
*
2 Turn the switch to the position:
Headlights will come on and all the other lights
remain on.
SIC3484
Headlight beam select
*
1 To select the low beam, put the lever in the neutral
position as shown.
*
2 To select the high beam, push the lever forward
while the switch is in the
position. Pull it back
to select the low beam.
*
3 Pulling the lever toward you will flash the headlight
high beam even when the headlight switch is in
the OFF position.
Battery saver system
. When the headlight switch is in the or
position while the ignition switch is in
the ON position, the lights will automatically
turn off 5 minutes after the ignition switch
has been turned to the OFF position.
. When the headlight switch remains in the
or position after the lights auto-
matically turn off, the lights will turn on when
the ignition switch is turned to the ON
position.
CAUTION
. When you turn on the headlight
switch again after the lights auto-
matically turn off, the lights will not
turn off automatically. Be sure to
turn the light switch to the OFF
position when you leave the vehicle
for extended periods of time, other-
wise the battery will be discharged.
. Never leave the light switch on
when the engine is not running for
extended periods of time even if the
headlights turn off automatically.
2-36 Instruments and controls
HEADLIGHT SWITCH
Lighting
*
1 Turn the switch to the position:
The front park, side marker, tail, license plate and
instrument lights will come on.
*
2 Turn the switch to the position:
Headlights will come on and all the other lights
remain on.
SIC3484
Headlight beam select
*
1 To select the low beam, put the lever in the neutral
position as shown.
*
2 To select the high beam, push the lever forward
while the switch is in the
position. Pull it back
to select the low beam.
*
3 Pulling the lever toward you will flash the headlight
high beam even when the headlight switch is in
the OFF position.
Battery saver system
. When the headlight switch is in the or
position while the ignition switch is in
the ON position, the lights will automatically
turn off 5 minutes after the ignition switch
has been turned to the OFF position.
. When the headlight switch remains in the
or position after the lights auto-
matically turn off, the lights will turn on when
the ignition switch is turned to the ON
position.
CAUTION
. When you turn on the headlight
switch again after the lights auto-
matically turn off, the lights will not
turn off automatically. Be sure to
turn the light switch to the OFF
position when you leave the vehicle
for extended periods of time, other-
wise the battery will be discharged.
. Never leave the light switch on
when the engine is not running for
extended periods of time even if the
headlights turn off automatically.