NISSAN 2012 Rogue - Owner's Manual - Manual (Page 96)

SIC4551
TRIP COMPUTER
To operate the trip computer, use the
*
A
switch.
When the ignition switch is in the ON position,
modes of the trip computer can be selected by
pushing the
switch
*
A briefly.
Each time the switch
*
A is pushed, the
display will change as follows:
Fuel Economy ? Average speed ? Driving
distance
? Elapsed time ? Range (distance to
empty) (dte) ? Settings
. When the switch
*
A is pushed and
held for less than 3 seconds, the selected
item can be reset except for “Range”,
“Current fuel consumption” and “Settings”.
. When the switch
*
A is pushed and
held for more than 3 seconds, all the items
on the display can be reset except for
“Current fuel consumption”, “Settings”,
“Range” and “TRIP A”.
Instruments and controls 2-25
SIC4551
TRIP COMPUTER
To operate the trip computer, use the
*
A
switch.
When the ignition switch is in the ON position,
modes of the trip computer can be selected by
pushing the
switch
*
A briefly.
Each time the switch
*
A is pushed, the
display will change as follows:
Fuel Economy ? Average speed ? Driving
distance ? Elapsed time ? Range (distance to
empty) (dte) ? Settings
. When the switch
*
A is pushed and
held for less than 3 seconds, the selected
item can be reset except for “Range”,
“Current fuel consumption” and “Settings”.
. When the
switch
*
A is pushed and
held for more than 3 seconds, all the items
on the display can be reset except for
“Current fuel consumption”, “Settings”,
“Range” and “TRIP A”.
Instruments and controls 2-25