Installing top tether strap -38 – NISSAN 2012 Sentra - Owner's Manual User Manual

Page 57

Advertising
background image

10. If the child restraint is installed in the front

passenger seat, place the ignition switch in
the ON position. The front passenger air bag

status light

or

should illumi-

nate. If this light is not illuminated, see

ЉFront

passenger air bag and status light

Љ in this

section. Move the child restraint to an-
other seating position.
Have the system
checked by a NISSAN dealer.

After the child restraint is removed and the seat
belt is fully retracted, the ALR mode (child re-
straint mode) is canceled.

INSTALLING TOP TETHER STRAP

First, secure the child restraint with the LATCH
lower anchors (rear outboard seat positions only)
or the seat belt, as applicable.

1. Flip up the anchor cover

1

from the anchor

point which is located directly behind the
child seat.

2. If necessary, raise or remove the head re-

straint to position the top tether strap over
the top of the seatback. If the head restraint
is removed, store it in a secure place. Be
sure to reinstall the head restraint when the
child restraint is removed. See “Head re-
straints” in this section for head re-
straint adjustment, removal and instal-
lation information.

3. Secure the tether strap to the tether anchor

point on the rear parcel shelf.

4. Refer to the appropriate child restraint in-

stallation procedure steps in this section
before tightening the tether strap.

If you have any questions when installing a
top tether strap, consult your NISSAN
dealer for details.

Forward-facing — step 10 (Type B)

LRS0316

LRS0723

1-38

Safety—Seats, seat belts and supplemental restraint system

Advertising