Getting started -71 – NISSAN 2013 Sentra - Owner's Manual User Manual

Page 218

Advertising
background image

You can also use the

button

to interrupt the system feedback
and give a command at once. See
“List of voice commands” and
“During a call” in this section for
more information.

PHONE/END
While the Voice Recognition sys-
tem is active, press and hold
the

button for 5 seconds to

quit the Voice Recognition system
at any time.

Tuning switch
While using the Voice Recogni-
tion system, tilt the tuning switch
up or down to manually control
the phone system.

GETTING STARTED

The following procedures will help you get
started using the Bluetooth® Hands-Free Phone
System with NISSAN Voice Recognition. For ad-
ditional command options, refer to “List of voice
commands” in this section.

Choosing a language

You can interact with the Bluetooth® Hands-
Free Phone System using English, Spanish or
French.

To change the language, perform the following.

1. Press and hold the

button for more

than 5 seconds.

2. The

system

announces:

“Press

the

PHONE/SEND (

) button for the

hands-free phone system to enter the voice
adaptation mode or press the PHONE/END
(

) button to select a different lan-

guage.”

3. Press the

button.

For information on voice adaptation, see
“Voice Adaptation (VA) mode” in this sec-
tion.

4. The system announces the current language

and gives you the option to change the lan-
guage to Spanish (in Spanish) or French (in
French). To select the current language,
press the PHONE/SEND (

) button. To

select a different language, tilt the tuning

switch (

or

) up or down.

NOTE:

You must press the

button within

5 seconds to change the language.

5. If you decide not to change the language, do

not press either button. After 5 seconds, the
VR session will end, and the language will
not be changed.

Connecting procedure

NOTE:

The connecting procedure must be per-
formed when the vehicle is stationary. If the
vehicle starts moving during the procedure,
the procedure will be cancelled.

Main Menu

“Connect phone”

A

“Add phone”

B

Initiate from handset

C

Name phone

D

1. Press the

button on the steering

wheel. The system announces the available
commands.

2. Say: “Connect phone”

A

. The system ac-

knowledges the command and announces
the next set of available commands.

Monitor, climate, audio, phone and voice recognition systems

4-71

Advertising