NISSAN 2013 Sentra - Owner's Manual - Manual (Page 322)

4. Push the release tab
᭺
4 .
5. Move the wiper blade down
᭺
5 and remove.
6. Insert the new wiper blade onto the wiper
arm until it clicks into place.
7. Rotate the wiper blade so the dimple is in the
groove.
8. Finally, pull the windshield wiper and washer
lever for 5 seconds. This action will cause
the wipers to resume the set position.
CAUTION
● After wiper blade replacement, return
the wiper arm to its original position;
otherwise it may be damaged when the
hood is opened.
● Make sure the wiper blades contact the
glass; otherwise the arms may be dam-
aged from wind pressure.
If you wax the surface of the hood, be careful not
to let wax get into the washer nozzle
᭺
A . This may
cause clogging or improper windshield-washer
operation. If wax gets into the nozzle, remove it
with a needle or small pin
᭺
B .
LDI2194 LDI2195
LDI2182
Maintenance and do-it-yourself 8-19