Truck-camper loading information -22 – NISSAN 2011 Titan - Owner's Manual User Manual

Page 371

Advertising
background image

CREW CAB MODELS

Crew Cab short wheel base models should
not be used to carry a slide-in camper.

KING CAB MODELS

This information is provided for you to properly
install a slide-in camper and is based on the
National Highway Traffic Safety Administration
regulations. It is recommended that, before in-
stalling the camper, you carefully read the follow-
ing information and ensure that the camper
meets the specifications.

This information may not apply to some Canada
model vehicles.

SPECIAL BODY VEHICLES

Some vehicles are equipped with commercial or
camper bodies. However, this Owner’s Manual
does not cover these options. For further infor-
mation, please refer to the body manufacturer’s
instruction manual.

LOCATION FOR CENTER OF
GRAVITY

The illustration indicates the recommended
cargo center of gravity location.

King Cab short wheel base:

L1 = 43.9 in (1,115.7 mm)

Crew Cab long wheel base:

L1 = 47.9 in (1,215.7 mm)

WARNING

Improper loading may be dangerous. If a
load is too far back, it can affect handling
characteristics. If a load is too far forward,
the front axle may be overloaded.

WTI0195

TRUCK-CAMPER LOADING
INFORMATION

9-22

Technical and consumer information

Advertising