NISSAN 2010 Versa Hatchback - Quick Reference Guide - Manual (Page 11)

9
TWIN TRIP ODOMETER
The twin trip odometer records the distance of two
individual trips.
Press the button 01
to change the display as follows:
Trip A Trip B Trip A.
Press and hold the button 01
for more than 1 second
to reset the currently displayed trip odometer to zero.
01
4-SPEED AUTOMATIC TRANSMISSION (if so equipped)
The 4-speed automatic transmission is electronically controlled to produce
maximum power and smooth operation.
The automatic transmission in your vehicle is designed so that the brake
pedal must be depressed before shifting from P (PARk) to any gear
position while the ignition switch is in the On position.
The shift lever cannot be moved out of P (PARk) and into any of the other
gear positions if the ignition is turned to the LOck position or if the key
is removed.
CONTINUOUSLY VARIABLE TRANSMISSION (CVT) (if so equipped)
The cVT does not produce a gear change
sensation like traditional automatic transmissions.
R (ReVeRSe) speed for cVT vehicles is limited
to 15 MPH (25 km/h).
The transmission in your vehicle requires a special
fluid available only at your niSSAn dealer. no other
fluid will meet the exact requirements of the cVT.
STARTinG THe enGine WiTH cVT
(niSSAn intelligent key™ models only)
depress the brake pedal.
Push the ignition knob in.
confirm the intelligent key system warning light is illuminated green.
Turn the ignition knob to start the engine.
TuRninG THe enGine Off WiTH cVT (niSSAn intelligent key™ models only)
Shift the shift lever into the P (PARk) position.
Turn the ignition knob to the LOck position.
OVeRdRiVe (O/d) Off SWiTcH
each time your vehicle is started, the cVT is automatically “reset” to Overdrive on.
To turn Overdrive mode off, push the O/D OFF switch
01
. The light in the instrument panel
will illuminate.
use the Overdrive off mode when you need improved engine braking.
01