Bluetooth, Hands-free phone system (if so equipped) – NISSAN 2010 Versa Hatchback - Quick Reference Guide User Manual

Page 16

Advertising
background image

14

BLUETOOTH

®

HANDS-FREE PHONE SYSTEM (if so equipped)

With an overhead microphone and sound
transmitted through the audio system speakers,
the Bluetooth

®

Hands-free Phone System

utilizes Bluetooth

®

wireless technology and

voice recognition to provide hands-free
cellular phone communication.

SYSTeM OPeRATinG TiPS

close all windows. Surrounding noises

may interfere with system operation and

performance.

Press the

button on the steering wheel to activate voice recognition.

Wait for the tone before speaking.

Begin speaking a command within 5 seconds of the tone.

Speak in a clear and natural voice without pausing between words.

To go back to the previous command, say “Go back” or “correction.”

To cancel a voice recognition session, simply wait 5 seconds, say “cancel” or “Quit,” or

press the

button.

To increase or decrease the volume of the voice prompts, push the VOL (volume) control

switch on the steering wheel or turn the POWER/VOLUME knob on the audio system

while the system is responding.

if the Voice Recognition system does not recognize your voice commands, train the system

using the Speaker Adaptation Mode. See your Owner’s Manual for detailed information.

Some commands are not available while the vehicle is in motion.

The “Help” command can be used in any menu to hear a list of available commands.

Please refer to the cellular phone manufacturer’s Owner’s Manual for detailed information

regarding your Bluetooth

®

phone.

For recommended phones and detailed instructions, please visit

www.nissanusa.com/bluetooth.

cOnnecTinG YOuR PHOne

To use the hands-free feature, you need to set up, or connect, the system to recognize your
cellular phone(s). five Bluetooth

®

-enabled phones can be connected. After setup, the system

automatically connects with a connected phone when the ignition is in the Acc or On position,
as long as the phone is on and in the vehicle.

nOTe: Some cellular phones require the user to enable the automatic reconnection feature. Please
refer to the cellular phone manufacturer’s Owner’s Manual for Bluetooth

®

setup information.

Advertising