NISSAN 2011 Xterra - Owner's Manual - Manual (Page 102)

Security indicator light
The security indicator light blinks whenever the
ignition switch is placed in the LOCK, OFF or ACC
position. This function indicates the NISSAN Ve-
hicle Immobilizer System is operational.
If the NISSAN Vehicle Immobilizer System is mal-
functioning, the light will remain on while the
ignition switch is placed in the ON position.
If the light still remains on and/or the en-
gine will not start, see a NISSAN dealer for
NISSAN Vehicle Immobilizer System ser-
vice as soon as possible. Please bring all
registered keys that you have when visiting
your NISSAN dealer for service.
SWITCH OPERATION
The windshield wiper and washer operates when
the ignition switch is in the ON position.
Push the lever down to operate the wiper at the
following speed:
᭺
1 Intermittent (INT) — intermittent operation
can be adjusted by turning the knob toward
᭺
A (Slower) or
᭺
B (Faster).
᭺
2 Low (LO) — continuous low speed operation
᭺
3 High (HI) — continuous high speed opera-
tion
Push the lever up
᭺
4 to have one sweep opera-
tion (MIST) of the wiper.
Pull the lever toward you
᭺
5 to operate the
washer. The wiper will also operate several times.
WARNING
In freezing temperatures the washer solu-
tion may freeze on the windshield and
obscure your vision which may lead to an
accident. Warm the windshield with the
defroster before you wash the windshield.
CAUTION
● Do not operate the washer if the
windshield-washer fluid reservoir is
empty.
● Do not fill the windshield-washer fluid
reservoir with washer fluid concen-
trates at full strength. Some methyl al-
cohol bases washer concentrates may
permanently stain the grille if spilled
while
filling the windshield-washer
fluid reservoir.
LIC0474 WIC0843
WINDSHIELD WIPER AND WASHER
SWITCH
Instruments and controls 2-25