NISSAN 2011 Xterra - Owner's Manual - Manual (Page 26)

Folding the 2nd row bench seat
To fold the 2nd row bench seat flat for maximum
cargo hauling:
᭺
1 Disconnect and secure the center seat belt
and tongues into the retractor base. See
“Stowing the center seat belt” later in this
section. Then properly stow the outboard
seat belts in the seat belt hooks before fold-
ing down the rear seats. See “Seat belt
hook” in this section for more information.
Lower the head restraints to the full “down”
position. Pull the strap forward, located in
the center of each seat cushion, and fold
each seat cushion toward the front of the
vehicle.
᭺
2 Then pull the straps located on the outside
edge of each seatback to fold the seatbacks
forward.
LRS0577 LRS0578
Safety—Seats, seat belts and supplemental restraint system 1-9