Increasing fuel economy -23, Using four wheel drive (4wd), If so equipped) -23 – NISSAN 2013 Xterra - Owner's Manual User Manual

Page 270

Advertising
background image

● Keep your engine tuned up.
● Follow the recommended scheduled main-

tenance.

● Keep the tires inflated to the correct pres-

sure. Low tire pressure increases tire wear
and lowers fuel economy.

● Keep the front wheels in correct alignment.

Improper alignment increases tire wear and
lowers fuel economy.

● For vehicles equipped with

, use 4H

or 4L position only when necessary. Four-
wheel drive operation lowers fuel economy.

● Use the recommended viscosity engine oil.

See “Engine oil and oil filter recommenda-
tions” in “Technical and consumer informa-
tion” later in this manual.

WARNING

For 4WD equipped vehicles, do not at-

tempt to raise two wheels off the
ground and shift the transmission to
any drive or reverse position with the
engine running. Doing so may result in
drivetrain damage or unexpected ve-
hicle movement which could result in
serious vehicle damage or personal
injury.

Do not attempt to test a 4WD equipped

vehicle on a 2-wheel dynamometer, or
similar equipment even if the other two
wheels are raised off the ground. Make
sure you inform test facility personnel
that your vehicle is equipped with 4WD
before it is placed on a dynamometer.
Using the wrong test equipment may
result in drivetrain damage or unex-
pected vehicle movement which could
result in serious vehicle damage or per-
sonal injury.

CAUTION

Do not drive the vehicle in the 4H or 4LO

position on dry hard surface roads. Driv-
ing on dry, hard surfaces in 4H or 4LO
may cause unnecessary noise, tire wear
and increased fuel consumption.

If the 4WD warning light turns on when
you are driving on dry hard surface
roads:

– in the 4H position, shift the 4WD shift

switch to 2WD.

– in the 4LO position for automatic

transmission vehicles, stop the ve-
hicle and shift the shift selector to
the N (Neutral) position with the
brake pedal depressed and shift the
4WD shift switch to 2WD.

– in the 4LO position for manual trans-

mission vehicles, stop the vehicle
and shift the shift selector to the N
(Neutral) position with the clutch
pedal depressed and shift the 4WD
shift switch to 2WD.

If the warning light is still on after the

above operation, have your vehicle
checked by a NISSAN dealer as soon as
possible.

INCREASING FUEL ECONOMY

USING FOUR WHEEL DRIVE

(4WD) (if so equipped)

Starting and driving

5-23

Advertising