Changing engine oil -10 – NISSAN 2013 Xterra - Owner's Manual User Manual

Page 319

Advertising
background image

CAUTION

Oil level should be checked regularly. Op-
erating the engine with an insufficient
amount of oil can damage the engine, and
such damage is not covered by warranty.

CHANGING ENGINE OIL

1. Park the vehicle on a level surface and apply

the parking brake.

2. Start the engine and let it idle until it reaches

operating temperature, then turn it off.

3. Remove the oil filler cap

A

by turning it

counterclockwise.

4. Place a large drain pan under the drain plug

B

.

5. Remove the drain plug

B

with a wrench by

turning it counterclockwise and completely
drain the oil.

If the oil filter is to be changed, remove and
replace it at this time. See “Changing engine
oil filter” in this section.

Waste oil must be disposed of prop-

erly.

Check your local regulations.

WARNING

Prolonged and repeated contact with

used engine oil may cause skin cancer.

Try to avoid direct skin contact with

used oil. If skin contact is made, wash
thoroughly with soap or hand cleaner
as soon as possible.

Keep used engine oil out of reach of

children.

CAUTION

Be careful not to burn yourself. The engine
oil may be hot.

6. Clean and reinstall the drain plug and a new

washer. Securely tighten the drain plug with
a wrench. Do not use excessive force.

Drain plug tightening torque:

22 - 29 ft-lb (29 - 39 N·m)

WDI0500

8-10

Maintenance and do-it-yourself

Advertising