Gamo PT-80 User Manual
Page 9
9
LOADING AMMUNITION
LOADING AMMUNITION FOR FIRING IN SEMI-AUTOMATIC MODE
WARNING:
Before loading or firing for the first time, check that there are no
obstructions in the barrel by passing a cleaning rod through it. Do this by following
instructions a and b in the previous section.
To load the pistol, APPLY the safety catch (fig. A) and carry out the following steps (fig. B):
a. Push the bolt forward (1), the handle for which is located on both sides of the
barrel, and open the top cover (2).
b. Remove the rotary magazine (3) (fig. B).
c. Insert 8 flat headed pellets in the 8 holes in the magazine (fig. B) with the pellet
head foremost until the pellet skirts are flush with the edge of the magazine. Check
that no pellets are sticking out.
d. Replace the magazine (3) in place, making sure that it goes to the bottom of its slot
and that the locating sear engages with one of the cogs on the outside of the
magazine.
e. Close the top cover (2), making sure that it is held in place.
English