Jeppesen JeppView 3 - Manual (Page 7)

10 11
View Weather in FliteDeck
Jeppesen does not sell weather receivers or XM WX subscriptions. Please
address all weather-related questions to the contacts provided below.
Additional information and examples of the weather products are available
in the FliteDeck User’s Guide and Help file.
With FliteDeck, you can now view critical weather information to keep
your flight safe and enjoyable. In order to view weather in FliteDeck, you
need a weather receiver and a subscription from XM WX.
After connecting to the receiver, you gain access to graphical products, as
well as textual information on the Airport Information page. Most of the
weather products overlay on the enroute chart and terminal chart to help
you identify areas of weather concern at a glance.
For information about receivers, please visit WxWorx on the Internet
(www.wxworx.com), or contact them at 321-751-9202. WxWorx can provide
detailed information about each receiver and what works best with XM WX.
For an XM WX subscription, visit XM WX on the Internet
(www.XMWXweather.com), or call 1-800-985-9200 for information
and activation of your service. Currently, XM WX provides service to
Canada and the contiguous US (all states except Alaska and Hawaii), its
territories and adjacent water. XM WX has a variety of service packages
you can choose from, each providing different levels of products and
pricing depending on your needs.
Working with RoutePacks (Continued)
Opening a RoutePack
Once you have created a RoutePack, you can access them in FliteStar and
JeppView by clicking
File>Load. Browse and select a RoutePack from the
default folder or from the location you designated.
Working with the Airport List (JeppView and FliteStar Only)
The Airport List contains all of the airports in your JeppView coverage area.
European VFR charts (Electronic Bottlang Airfield Manual) were added to
JeppView version 3.5. If you have a VFR chart subscription, the Airport List
displays the European VFR airport and chart icons in green. With an IFR
and VFR subscription, IFR airport icons are in blue and VFR airport icons
are in green to distinguish between the two airport types.
Printing a Subscription Revision Letter
Use the Airport List to print a subscription Revision Letter. Before doing so,
check that no filters are in place by reviewing the filter status at the bottom
of the Airport List window. If filters are active, they affect the results of
the Revision Letter.
1. Select all of the airports in the Airport List by selecting one airport
and pressing CTRL+A.
2. Right-click inside the Airport List and click Print.
3. In the Printing dialog box, select the RevisionLetter check box.
4. Select the OnlyChangedCharts check box if you need to print the
Revision Letter and all of the charts in the Revision Letter that have
been added or modified.
5. Click Print or PrintPreview. Print Preview allows you to preview the
document before printing it on paper.