Kraus C-GV-710-12mm-1005ORB - Manual

Dear Valued Customer,
Kraus would like to take this opportunity
to thank you for purchasing Kraus
products. It is our sincere hope that you
are completely satisfied with your new
purchase. We welcome any questions or
comments you may have, and look
forward to assisting you in the future.
Sincerely,
Kraus Customer Service Department.
Contact Us Toll-Free at 1-800-775-0703; or visit our website at www.kraususa.com. © 2009-2010 Kraus USA Inc. Contact Us Toll-Free at 1-800-775-0703; or visit our website at www.kraususa.com. © 2008-2009 Kraus USA Inc.
AB1953 Compliant
Adjustable wrench Pipe tape Groove joint plier Phillips screwdriver If you've followed the instructions carefully and your faucet still does not work properly, take these corrective steps.
Problem Cause Action
Before Your Installation
Tools You Will Need
Check to make sure you have the following parts indicated below:
Leakage under the handle. Adjusting ring or cap has come loose. Tighten the adjusting ring or cap.
Aerator leaks or has an inconsistent
water flow pattern. Aerator is dirty or misfitted. Unscrew the aerator to check rubber packing
or replace the aerator.
Water will not shut off completely.
SAFETY TIPS
• If you use soldering during the faucet installation, the seats, cartridges and washers must be
removed before using the flame. Otherwise, warranty will be void on these parts.
• Cover your drain to avoid loosing parts.
MAINTENANCE
Your new faucet is designed for years of trouble-free performance.
Keep it looking new by cleaning it periodically with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these
will dull the finish and void your warranty.
MAINTENANCE
Your new faucet is designed for years of trouble-free performance.
Keep it looking new by cleaning it periodically with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these
will dull the finish and void your warranty.
Faucet Installation Procedure
Shut off main water supply before installation.
Model
FVS-1005-CH
FVS-1005-BN
FVS-1005-ORB
Hex wrench
Dirty or worn out plastic washer in the
cartridge. Remove the handle and the cartridge to check if the ceramic
dish is dirty or permanently damaged.
Trouble - Shooting
Keep this manual for ordering replacement parts.
Replacement Parts
Silicone Sealant
The fittings should be installed by a licensed plumber.
KRAUS is proud to offer its customers the strongest, most durable
c e r a m i c c a r t r i d g e s i n a l l s o l i d b r a s s K i t c h e n F a u c e t s i t
manufactures. KRAUS guarantees all of our products to be free of
defect in materials and craftsmanship. All KRAUS BRAND Kitchen
Faucets carry a limited lifetime warranty from the original date of
purchase.
If a product fails due to defect in material or craftsmanship during
the warranty period, KRAUS will repair or replace the items at our
sole discretion. Warranty does not apply when the item has been
tampered with, misused, improperly installed, altered, or damaged
due to abuse or accident. Proof of purchase (original sales receipt)
must be provided to KRAUS for all warranty claims. Please contact
one of our representatives if you need any additional details. All KRAUS products must be installed by a licensed professional
plumber or contractor to avoid any improper use or installation.
IN NO EVENT SHALL KRAUS BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES, INSTALLATION
COST, LABOR, TRAVEL TIME, FREIGHT COSTS INCURRED, LOST
PROFITS, OR CONTINGENT LIABILITIES.
KRAUS USA Inc. makes no representation that its products
comply with any or all local building or plumbing codes. It is the
consumer’s responsibility to determine local code compliance.
This warranty extends to the original purchaser and first
consumer.
2 1 3 Install faucet body and base trim
ring through top of sink. From underneath the sink,replace
mounting hardware assembly.Tighten
lock nut to secure the body. Apply pipe tape on threads of the
inlet port. Tighten end of shank with
wrench and slip hose into the inlet
port.
4 5 Apply pipe tape onto threads
of the water supply. Tighten the
hose onto water supply. After installing faucet, remove aerator and
turn on water to remove any left of debris.
Re-assemble aerator.
7
KRAUS” Brand Kitchen Faucets Limited Lifetime Warranty
Single Handle
Lavatory Faucet
1.
2.
3.
4.
5.
6.
7.
9.
8.
1 Handle Cap
2 Metal Handle
3 Trim Cap
4 Locking
Nut
5 Ceramic Disc Cartridge
6 Base Trim Ring
7 Mounting Hardware Assembly
8 Aerator
9 Cover Plate & Putty Plate