Selecting a channel, Storing and selecting pre-set channels – Dodge 2010 Viper - Owner Manual User Manual

Page 135

Advertising
background image

Selecting Uconnect™ Multimedia (Satellite) Mode
in RBP, RBU, RAZ, RB1 and RBQ Radios
Press the MODE button repeatedly until the word

ЉSIRIUSЉ appears in the display. These radios will also
display the following:

• After three seconds, the current channel name and

channel number will be displayed for five seconds.

• The current program type and channel number will

then be displayed for five seconds.

• The current channel number will then be displayed

until an action occurs.

A CD or tape may remain in the radio while in the
Satellite radio mode.

Selecting a Channel
Press and release the SEEK or TUNE buttons to search for
the next channel. Press the top of the button to search up

and the bottom of the button to search down. Holding the
TUNE button causes the radio to bypass channels until
the button is released.

Press and release the SCAN button (if equipped) to
automatically change channels every seven seconds. The
radio will pause on each channel for seven seconds
before moving on to the next channel. The word

ЉSCANЉ

will appear in the display between each channel change.
Press the SCAN button a second time to stop the search.

NOTE:

Channels that may contain objectionable content

can be blocked. Contact Sirius Customer Care at 888-539-
7474 to discuss options for channel blocking or unblock-
ing. Please have your ESN/SID information available.

Storing and Selecting Pre-Set Channels
In addition to the 10 AM and 10 FM pre-set stations, you
may also commit 10 satellite stations to pushbutton
memory. These satellite channel pre-set stations will not

4

UNDERSTANDING YOUR INSTRUMENT PANEL

131

Advertising